Probe Temperature Measurement Range: -55 º C to +125 º C (-67 º F to +257 º F) (NIST traceable)
Precision: 0.5 º C or 0.1 º C (for text command interface only 0.5 º C)
Accuracy: +/- 0.5 º C over 0 º C to +70 º C, +/- 1 º C over remainder of temperature range
Electronic Housing Temperature Operating Range: 0 º C to +60 º C (32 º F to +140 º F)
Electronic Housing Humidity Operating Range: < 90 % RH (non-condensating)
Maximum measurement rate: one reading every second
Probe dimensions: 20.3 cm (8") long, 6 mm (1/4") diameter, stainless steel probe with 1.2 m (4 ft.) long, high-temp silicone rubber cable.
Housing Dimensions: 8 cm (3.1") x 4 cm (1.6") x 2 cm (0.8")
Housing Material: injection molded ABS thermoplastic
Housing Colour: light gray
Sensor type: semiconductor
Communications connector: 8 position modular jack (accepts 8 position RJ-45 plug)
Power source: External DC power connector
Power supply current drain: < 300 mA
External DC power connector: 2.1 mm power jack, center positive, reverse polarity and over-voltage protection
External power supply voltage: 6.0 - 9.0 VDC
Communications Interface: 10/100 Base-T Ethernet
Communications Interface/Protocol: Three single key (lower-case) text commands ("t" temperature, "m" model, "v" firmware version) or Sensorsoft Device Protocol (SSDP) - Version 2.1
Error control: Only in Sensorsoft Device Protocol (SSDP) operation - 16 bit CRC (cyclic redundancy checking) for detection of communication errors between the Sensorsoft Thermometer and host computer.